Engranajes cónicos helicoidales - Importación exportación

These are double helical gears with a right and left helix, with the teeth forming a V. Their objective is to eliminate axial forces and minimize slip errors. Capacities: -Diameters between 10 and 750 mm. -Modules between 1 and 20. -Diametral pitch between 50 and 1.5. -Carving lengths between 0 and 200mm.

Spur gears are the most common type of gear manufactured. They are generally used for low and medium speeds, since at high speeds, if they are not rectified or corrected, they produce variable noise. CAPABILITIES: - Diameters between 10 and 1,500 mm. - Modules between 0.5 and 25. - Diametral pitch between 50 and 1. - Carving lengths between 0 and 400 mm. - Carving of pumped.

- Diameters between 50 and 630 mm. - Modules between 1 and 12. - Diametral pitch between 50 and 2.5. - Carving lengths between 0 and 250 mm. - NILES grinding machine.

Helical toothed cylindrical gears are characterized by their oblique toothing in relation to the axis of rotation. The axes can be parallel or cross, usually at 90º. They have the advantage of transmitting more power and speed than straights and are also quieter and more durable. Their main drawback is their greater wear and that they need more greasing than the straight ones. CAPABILITIES: - Diameters between 10 and 1,500 mm. - Modules between 0.5 and 25. - Diametral pitch between 50 and 1. - Carving lengths between 0 and 400 mm. - Carving of pumped.